![]() ![]() Firmware installer will not work with HDMI converter cables.Run the Thunderbolt Firmware installer and follow the prompts.If prompted to allow the Thunderbolt software to always be active, select YES.Connect the Thunderbolt 3 Docker to the Windows PC that has the Thunderbolt Firmware update utility on it.NOTE: Firmware update tool will not work with HDMI converter cables.Connect an external HDMI monitor to Video 1 port on the Thunderbolt 3 Docker.Boot the system to Windows and download the Thunderbolt Firmware update utility.Internal Thunderbolt controller = enabled.Boot the system in to the BIOS and configure the Thunderbolt options with the following settings.Monitor Configuration: External monitor connected using an HDMI cable to the HDMI connector on Video Port 1 on the Thunderbolt 3 dock.Intel Thunderbolt Software needs to be installed on the PC. ![]() PC Configuration: The PC must have a Thunderbolt port, and the BIOS configured as: Internal Thunderbolt controller = enabled, Devices under Thunderbolt = enabled and Security Level = No Security.Windows based PC that supports Thunderbolt connectivity running Windows 10 RS4+ with Administrator Rights.Download (ID: 4016462), unzip and run the Thunderbolt Firmware update utility. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |